Guide

Toner Transformation: Step-by-Step Guide to Changing Toner in Brother HL-L2370DW

Mathew is the owner and lead writer of techdigitalpro.com. With over 10 years of experience in IT support and mobile device repair, Mathew started this blog to help people solve common tech problems themselves. Through step-by-step tutorials and troubleshooting guides, Mathew aims to demystify technology and make it less frustrating...

What To Know

  • Grasp the handle on the old toner cartridge and pull it straight out of the printer.
  • Remove the new toner cartridge from its packaging and gently shake it from side to side to distribute the toner powder.
  • Align the new toner cartridge with the guides inside the printer and push it firmly into place until it clicks.

How to Change Toner Brother HL-L2370DW: A Step-by-Step Guide</h1>

Replacing the toner cartridge in your Brother HL-L2370DW laser printer is a simple and straightforward process. By following these step-by-step instructions, you can ensure that your printer continues to produce high-quality prints without any interruptions.

Safety Precautions

  • Always unplug the printer before performing any maintenance tasks.
  • Avoid touching the toner cartridge directly, as the toner powder can be harmful if ingested or inhaled.
  • If toner powder spills, clean it up immediately using a damp cloth.

Materials Required

[leafio_tag_amz_field][/leafio_tag_amz_field]
  • New Brother HL-L2370DW toner cartridge (TN-760)

Step-by-Step Instructions

1. Open the Front Cover

  • Locate the front cover of the printer and gently lift it up until it locks into place.

2. Remove the Old Toner Cartridge

  • Grasp the handle on the old toner cartridge and pull it straight out of the printer.

3. Unpack the New Toner Cartridge

  • Remove the new toner cartridge from its packaging and gently shake it from side to side to distribute the toner powder.

4. Insert the New Toner Cartridge

  • Align the new toner cartridge with the guides inside the printer and push it firmly into place until it clicks.

5. Close the Front Cover

  • Once the new toner cartridge is installed, close the front cover until it snaps into place.

6. Reset the Toner Counter

  • Press and hold the “Cancel” button on the printer’s control panel for 5 seconds.
  • The printer will display a message confirming that the toner counter has been reset.

7. Print a Test Page

  • Print a test page to verify that the new toner cartridge is working correctly.

Troubleshooting

[leafio_tag_amz_field][/leafio_tag_amz_field]
  • Printer is not recognizing the new toner cartridge: Ensure that the new toner cartridge is compatible with your printer model and that it is properly installed.
  • Prints are faint or faded: The toner cartridge may be running low. Replace the toner cartridge with a new one.
  • Toner powder is spilling: The toner cartridge may be damaged. Replace the toner cartridge with a new one.

Tips

[leafio_tag_amz_field][/leafio_tag_amz_field]
  • Use genuine Brother toner cartridges to ensure optimal print quality and performance.
  • Store toner cartridges in a cool, dry place to prevent damage.
  • If you do not use your printer regularly, print a few pages every month to prevent the toner powder from caking.

Questions You May Have

Q: How often should I change the toner cartridge?
A: The frequency of toner cartridge replacement depends on the volume of printing. However, most toner cartridges should be replaced after printing approximately 1,200 pages.

Q: Can I refill the toner cartridge myself?
A: While it is possible to refill toner cartridges, it is not recommended. Refilling toner cartridges can damage the printer and void the warranty.

Q: What should I do if I spill toner powder?
A: Clean up the toner powder immediately using a damp cloth. Avoid using a vacuum cleaner, as this can spread the toner powder.

Mathew

Mathew is the owner and lead writer of techdigitalpro.com. With over 10 years of experience in IT support and mobile device repair, Mathew started this blog to help people solve common tech problems themselves. Through step-by-step tutorials and troubleshooting guides, Mathew aims to demystify technology and make it less frustrating for users. In his spare time, John enjoys dissecting electronics to learn how they work and trying to fix gadgets that others have given up on. He is always researching the latest devices and software in order to help readers of techdigitalpro.com solve any issue they may encounter.
Back to top button