Guide

Keyboard Malfunction? Get It Fixed Today! How to Replace Keyboard HP ProBook 450 G6

Mathew is the owner and lead writer of techdigitalpro.com. With over 10 years of experience in IT support and mobile device repair, Mathew started this blog to help people solve common tech problems themselves. Through step-by-step tutorials and troubleshooting guides, Mathew aims to demystify technology and make it less frustrating...

What To Know

  • Replacing a keyboard on an HP ProBook 450 G6 is a relatively simple task that can be completed in a few easy steps.
  • If your laptop has a backlit keyboard, connect the backlight cable to the keyboard.
  • Replacing the keyboard on an HP ProBook 450 G6 is a straightforward process that can be completed in a short amount of time.

Replacing a keyboard on an HP ProBook 450 G6 is a relatively simple task that can be completed in a few easy steps. This guide will provide you with the necessary instructions to successfully replace your keyboard.

Tools and Materials Required

  • New HP ProBook 450 G6 keyboard
  • Philips #0 screwdriver
  • Spudger or plastic pry tool
  • Tweezers (optional)

Safety Precautions

[leafio_tag_amz_field][/leafio_tag_amz_field]
  • Disconnect the laptop from any power source before beginning.
  • Handle the components carefully to avoid damage.
  • Wear anti-static gloves or a wrist strap to discharge any static electricity.

Step-by-Step Instructions

1. Remove the Battery

  • Locate the battery release latch on the bottom of the laptop.
  • Slide the latch to release the battery.
  • Lift the battery out of the laptop.

2. Remove the Back Cover

  • Use a Philips #0 screwdriver to remove the 10 screws securing the back cover.
  • Lift the back cover off the laptop.

3. Disconnect the Keyboard Cable

  • Locate the keyboard cable connector on the motherboard.
  • Gently pull the connector straight up to disconnect the keyboard cable.

4. Remove the Keyboard Screws

  • Use a Philips #0 screwdriver to remove the 5 screws securing the keyboard.

5. Lift the Keyboard

  • Carefully lift the keyboard slightly from the front edge.
  • Use a spudger or plastic pry tool to gently pry the keyboard loose from the laptop.

6. Disconnect the Keyboard Backlight Cable (Optional)

  • If your laptop has a backlit keyboard, you will need to disconnect the backlight cable.
  • Locate the backlight cable connector on the keyboard.
  • Gently pull the connector straight up to disconnect the backlight cable.

7. Remove the Keyboard

  • Lift the keyboard completely out of the laptop.

8. Install the New Keyboard

  • Align the new keyboard with the laptop frame.
  • Gently lower the keyboard into place.
  • Press down on the keyboard to secure it.

9. Connect the Keyboard Cable

  • Insert the keyboard cable connector into the motherboard.
  • Push down on the connector until it clicks into place.

10. Connect the Keyboard Backlight Cable (Optional)

  • If your laptop has a backlit keyboard, connect the backlight cable to the keyboard.
  • Push down on the connector until it clicks into place.

11. Install the Keyboard Screws

  • Insert the 5 screws into the keyboard and tighten them using a Philips #0 screwdriver.

12. Install the Back Cover

  • Align the back cover with the laptop frame.
  • Press down on the back cover to secure it.
  • Insert the 10 screws and tighten them using a Philips #0 screwdriver.

13. Install the Battery

  • Slide the battery into the laptop.
  • Push down on the battery until it clicks into place.

14. Test the Keyboard

  • Connect the laptop to a power source.
  • Turn on the laptop and test the keyboard to ensure it is working properly.

Troubleshooting

[leafio_tag_amz_field][/leafio_tag_amz_field]
  • If the keyboard is not working after replacing it, check the following:
  • Ensure the keyboard cable is securely connected to the motherboard.
  • Ensure the keyboard backlight cable is connected (if applicable).
  • Try using a different keyboard to rule out any hardware issues.

Wrapping Up

[leafio_tag_amz_field][/leafio_tag_amz_field]

Replacing the keyboard on an HP ProBook 450 G6 is a straightforward process that can be completed in a short amount of time. By following the steps outlined in this guide, you can successfully replace your keyboard and restore your laptop to full functionality.

Q: What are the signs of a faulty keyboard?
A: Common signs include unresponsive keys, sticking keys, or keys that are not registering.

Q: Can I replace the keyboard on my own?
A: Yes, it is possible to replace the keyboard on your own by following the steps in this guide.

Q: Where can I purchase a replacement keyboard?
A: You can purchase a replacement keyboard from various online retailers or authorized HP service centers.

Q: How long will it take to replace the keyboard?
A: The replacement process typically takes around 15-30 minutes.

Q: Will replacing the keyboard void my laptop’s warranty?
A: Replacing the keyboard yourself may void your warranty if it is not done by an authorized technician.

Mathew

Mathew is the owner and lead writer of techdigitalpro.com. With over 10 years of experience in IT support and mobile device repair, Mathew started this blog to help people solve common tech problems themselves. Through step-by-step tutorials and troubleshooting guides, Mathew aims to demystify technology and make it less frustrating for users. In his spare time, John enjoys dissecting electronics to learn how they work and trying to fix gadgets that others have given up on. He is always researching the latest devices and software in order to help readers of techdigitalpro.com solve any issue they may encounter.
Back to top button