Guide

Why Your Ipad Air 2 Digitizer Stopped Working And What To Do About It

Mathew is the owner and lead writer of techdigitalpro.com. With over 10 years of experience in IT support and mobile device repair, Mathew started this blog to help people solve common tech problems themselves. Through step-by-step tutorials and troubleshooting guides, Mathew aims to demystify technology and make it less frustrating...

What To Know

  • This could be a result of a cracked or damaged screen, or it could be a problem with the digitizer itself.
  • The cost to fix an iPad air 2 digitizer will depend on the specific issue and where you go to have the repair done.
  • However, it’s important to keep in mind that this is just an average, and the actual cost could be higher or lower depending on the specific problem and the shop or technician you use.

iPad Air 2 digitizer not working is a common issue that many people face. When the digitizer stops working, it can be difficult to use your iPad. In this blog post, we will discuss some tips and tricks that can help you fix your iPad air 2 digitizer not working issue. We will also provide some advice on how to prevent the problem from happening again.

Ipad Air 2 Digitizer Not Working

The iPad air 2 digitizer not working could be due to several reasons. The most common cause is a software issue. To fix this, try restarting your iPad. If that doesn’t work, try restoring your iPad to factory settings. This will erase all of your data, so make sure you have a backup before doing this.

If the issue persists, it could be a hardware problem. In this case, you’ll need to contact Apple for further assistance.

In the meantime, you can try using your iPad in “airplane mode” to see if that resolves the issue. To do this, go to Settings > Airplane Mode and turn it on. This will turn off all wireless connections, including Wi-Fi and Bluetooth, but you can still use the apps on your iPad.

If the problem persists, try connecting your iPad to a computer and transferring your files to a backup drive. Then, contact Apple for further assistance.

What Are The Common Causes Of An Ipad Air 2 Digitizer Not Working?

  • 1. Physical damage to the iPad, such as cracks or scratches on the screen.
  • 2. Liquid damage to the iPad, especially if the liquid has entered the device through the screen.
  • 3. Software glitches or bugs that can cause the digitizer to malfunction.
  • 4. Aging or wear and tear on the device, which can cause the digitizer to become less responsive over time.
  • 5. Improper use or handling of the iPad, such as dropping it or putting pressure on the screen.

How Can I Tell If My Ipad Air 2 Digitizer Is Broken?

If your iPad Air 2 digitizer is broken, there are a few telltale signs you can look out for. First, you might notice that your touchscreen is no longer responding to your touch. This could be a result of a cracked or damaged screen, or it could be a problem with the digitizer itself.

Second, you might notice lines or distortion on your display. This is usually caused by the digitizer being damaged or disconnected.

Third, you might notice a flickering screen. This is usually caused by a loose connection between the digitizer and the display.

Finally, you might notice a buzzing or clicking sound coming from your iPad Air 2. This is usually caused by a loose connection between the digitizer and the display.

If you are experiencing any of these symptoms, it is likely that your iPad Air 2 digitizer is broken. In this case, you will need to replace the digitizer in order to restore your touchscreen functionality. To do this, you will need to disassemble your iPad Air 2 and replace the broken digitizer with a new one. This is a delicate process and should be done by a professional.

How Much Does It Cost To Fix An Ipad Air 2 Digitizer?

The cost to fix an iPad air 2 digitizer will depend on the specific issue and where you go to have the repair done. On average, the cost of fixing an iPad air 2 digitizer can range from $200 to $500. However, it’s important to keep in mind that this is just an average, and the actual cost could be higher or lower depending on the specific problem and the shop or technician you use. If you’re looking to save money, you might consider doing the repair yourself, or shopping around for the best deal.

How Do I Repair An Ipad Air 2 Digitizer?

The iPad Air 2 digitizer is the screen assembly that includes the touch screen and the glass. To repair it, you will need to disassemble the iPad and replace the digitizer. Here is a step-by-step guide to repairing the iPad Air 2 digitizer:

1. Power off the iPad and disconnect all cables.

2. Remove the screws from the back of the iPad using a Phillips screwdriver.

3. Gently pry open the iPad using a pry tool, being careful not to damage the LCD.

4. Disconnect the digitizer cable from the motherboard.

5. Remove the old digitizer from the iPad.

6. Install the new digitizer by reversing the steps above.

7. Power on the iPad and test the digitizer to make sure it is working.

Remember, repairing the iPad Air 2 digitizer is a technical task and should be done by someone who is experienced with electronic devices. If you are not comfortable doing it yourself, it is best to take it to a professional.

Are There Any Alternatives To Replacing An Ipad Air 2 Digitizer?

Yes, there are a few alternatives to replacing an iPad air 2 digitizer. One option is to use an external keyboard or case with a keyboard, which can allow you to type on the device without having to use the touchscreen. Another option is to use an external mouse, which can be connected to the iPad via Bluetooth or USB. Additionally, you can use software accessibility features on the iPad, such as VoiceOver or Zoom, to make it easier to interact with the device without using the touchscreen.

Final Note

If your iPad Air 2 digitizer is not working, there are a few steps you can take to try and fix the problem. First, try restarting your iPad. If that doesn’t work, you can try restoring your iPad. If that doesn’t work, you may need to take your iPad to a professional for repairs.

Was this page helpful?

Mathew

Mathew is the owner and lead writer of techdigitalpro.com. With over 10 years of experience in IT support and mobile device repair, Mathew started this blog to help people solve common tech problems themselves. Through step-by-step tutorials and troubleshooting guides, Mathew aims to demystify technology and make it less frustrating for users. In his spare time, John enjoys dissecting electronics to learn how they work and trying to fix gadgets that others have given up on. He is always researching the latest devices and software in order to help readers of techdigitalpro.com solve any issue they may encounter.
Back to top button