Guide

Samsung Galaxy Tab A7 Not Holding Charge? Here’s What You Can Do!

Mathew is the owner and lead writer of techdigitalpro.com. With over 10 years of experience in IT support and mobile device repair, Mathew started this blog to help people solve common tech problems themselves. Through step-by-step tutorials and troubleshooting guides, Mathew aims to demystify technology and make it less frustrating...

What To Know

  • The 7040 mAh battery, which is seen as the main feature, was one of the biggest reasons for users to choose the tablet.
  • If the battery in your Galaxy Tab A7 is old or degraded, it may not be able to hold a charge as well as it used to.
  • If your tablet’s battery is not holding a charge, you can try enabling Power Saving Mode to extend your battery life.

Samsung Electronics, which was once at the top of the tablet market, introduced Samsung Galaxy Tab A7 in September 2020. The 10.4-inch LCD tablet, which was seen as the successor of Samsung Galaxy Tab A 8.0 (2019), came with a Snapdragon 662 processor and 3 GB of RAM. Samsung, which did not neglect the cameras in its tablet, came out of the box with a 5 MP front camera and 8 MP main camera. The 7040 mAh battery, which is seen as the main feature, was one of the biggest reasons for users to choose the tablet.

Samsung Galaxy Tab A7 Not Holding Charge

There are a few possible reasons why your Samsung Galaxy Tab A7 may not be holding a charge. Here are a few things you can try to resolve the issue:

1. Battery Calibration: Sometimes, the device’s battery management system can become confused and inaccurately estimate the battery’s remaining capacity. To recalibrate the battery, fully charge the device and then let it drain completely. Then, charge the device again until it says it is fully charged. This process should reset the battery management system and help your tablet hold a charge better.

2. Battery Health: If the battery in your Galaxy Tab A7 is old or degraded, it may not be able to hold a charge as well as it used to. You can check the battery health by going to Settings > Device Care > Battery > Battery Health. If the battery health is low, you may need to consider replacing the battery.

3. Background App Refresh: Some apps constantly run in the background, even when you’re not using them, which can drain the battery. To disable background app refresh for individual apps, go to Settings > Apps > ⋮ > Special Access > Battery Optimization > All Apps > ⋮ > Don’t Optimize.

4. Screen Brightness: Keeping your screen brightness low can help conserve battery life. To adjust the screen brightness, go to Settings > Display > Brightness Level.

5. Power Saving Mode: If your tablet’s battery is not holding a charge, you can try enabling Power Saving Mode to extend your battery life. To do this, go to Settings > Device Care > Battery > Power Saving Mode.

If none of these solutions work, you may need to consider replacing the battery or contacting Samsung for further assistance.

How Can I Fix My Samsung Galaxy Tab A7 Not Holding A Charge?

  • 1. Try a different charger and cable.
  • 2. Clean the charging port of your device.
  • 3. Disable any battery-draining apps or features.
  • 4. Update your device’s software.
  • 5. Consider taking your device to a repair shop for a check-up.

How Long Should My Samsung Galaxy Tab A7 Hold A Charge?

Your Samsung Galaxy Tab A7 should be able to hold a charge for about 10 hours, depending on usage. If you use it for light tasks like browsing the internet or reading, it should last around 10 hours. However, if you use it for heavy tasks like gaming or watching videos, it will likely last around 6-8 hours. Additionally, factors like screen brightness and Wi-Fi usage can also affect battery life.

How Do I Test My Samsung Galaxy Tab A7’s Battery?

To check the battery on your Samsung Galaxy Tab A7, follow these steps:

1. Fully charge your tablet: Before testing the battery, ensure it is fully charged. This will give you a more accurate picture of its overall health.

2. Use the device until it powers off: Let the tablet run until it powers off. This will let you know how long it lasts under normal usage conditions.

3. Wait a few minutes: After the device powers off, wait a few minutes before restarting it. This allows the battery to cool down and stabilize.

4. Restart the device: Press and hold the Power button until the tablet powers on.

5. Check the Battery Usage screen: From the Settings menu, select Battery and look at the Battery Usage screen. This will show you which apps and features have been using the most power.

6. Check the Battery Health: You can also check the Battery Health from the Settings menu. This will give you an indication of your battery’s overall health.

By following these steps, you should be able to get a good idea of the battery’s health and performance on your Samsung Galaxy Tab A7.

What Should I Do If My Samsung Galaxy Tab A7 Won’t Charge?

If your Samsung Galaxy Tab A7 won’t charge, there are a few troubleshooting steps you can take to resolve the issue. First, check the charging cable and wall adapter for any physical damage. Make sure the charging cable is properly connected to both the tablet and the wall adapter. If the charging cable or adapter is damaged, you may need to replace it.

Next, try using a different charging cable and wall adapter to see if the problem is with the charging accessories. If using a different charger solves the problem, you may need to replace the damaged charger.

If the charging cable and adapter appear to be in good condition, there may be an issue with the charging port on your tablet. You can try cleaning the charging port with a soft, dry cloth to remove any dust or debris that may be preventing a proper connection.

If the charging port appears to be damaged, you may need to have it repaired or replaced. You can take your tablet to a Samsung service center or a qualified technician for assistance.

If none of the above solutions work, it’s possible that there may be a problem with the battery in your tablet. In this case, you may need to have the battery replaced. Again, you can take your tablet to a Samsung service center or a qualified technician for assistance.

Remember, if you’re not sure how to safely troubleshoot and repair your tablet, it’s best to leave it to a professional.

How Can I Improve The Performance Of My Samsung Galaxy Tab A7’s Battery?

There are several ways to improve battery life on your Samsung Galaxy Tab A7.

1. Dim the screen: Lowering the screen brightness will significantly save battery.

2. Disable unnecessary apps: Apps running in the background can use up battery life. Closing them when not in use can save power.

3. Disable location services: GPS, Wi-Fi, and Bluetooth can quickly drain the battery. Turning them off when not in use can save power.

4. Turn off notifications: Too many notifications can drain the battery. Turning off unnecessary notifications can save power.

5. Use battery-saving mode: The battery-saving mode will limit some functions and turn off some features to save power.

6. Disable automatic syncing: Automatic syncing can drain the battery. Disabling it when not in use can save power.

7. Use dark mode: Dark mode can save battery life by reducing the amount of power the display uses.

8. Keep your device cool: High temperatures can shorten the battery life. Keeping your device in a cool place can help.

9. Avoid charging your device to 100%: Lithium-ion batteries last longer if you charge them to 80% or less.

10.

The Bottom Line

If you’re experiencing issues with your Samsung Galaxy Tab A7 not holding a charge, there are a few things you can do to try and fix the problem. First, try resetting your device by holding down the power and volume down buttons simultaneously until the device turns off. Once the device has turned off, press and hold the powerbutton to turn it back on. If this doesn’t work, you may need to take your device to a service center for repair. Remember to backup your data before attempting any repairs.

Mathew

Mathew is the owner and lead writer of techdigitalpro.com. With over 10 years of experience in IT support and mobile device repair, Mathew started this blog to help people solve common tech problems themselves. Through step-by-step tutorials and troubleshooting guides, Mathew aims to demystify technology and make it less frustrating for users. In his spare time, John enjoys dissecting electronics to learn how they work and trying to fix gadgets that others have given up on. He is always researching the latest devices and software in order to help readers of techdigitalpro.com solve any issue they may encounter.
Back to top button